Description | FAQ | Documentation | Order
Chimp Daddy LLC works hard to make devices which automate manual
processes that otherwise you would have to do manually all the time.
We call these “Chimps”. Why continually perform a manual operation
yourself when you can get a Chimp to do it for you, right? The Traction
Control Chimp is a traction control switch inverter. It defaults your
vehicles traction control to “Off” every time you turn the ignition on.
The Traction Control Chimp has a built in delay of twenty seconds before
the traction control circuit is actuated and turned off. This delay is
important because it accounts for possible hard starting conditions. It
also gives the vehicles electrical system a chance to power up and
accept the traction control state change.
Another advantage to the Traction Control Chimp is that even when
installed you retain the use of the vehicles traction control button
and can transition the traction control state On/Off at any time.
The installation takes about 10 minutes and only a screw driver
and pair of pliers are needed to install the system. There are two
different versions of the Traction Control Chimp. Manual & Automatic
transmission vehicles have different versions of the Traction Control
Chimp as one setup requires a slightly longer wiring harness than
the other. Please keep this in mind when ordering and select the
appropriate transmission type to ensure you receive the correct
version.
Listed below are the vehicles that the Traction
Control Chimp currently supports.
Pontiac GTO 2004 - 2006
Product Use Disclaimer
The Traction Control Chimp will automatically defeat the traction control
system on your vehicle. This may lead to loss of traction and control of
your vehicle under heavy throttle or low traction conditions. Chimp Daddy
LLC assumes no responsibility or liability if damage, injury, death, or
other that may occur with the use of our product. Use this product
responsibly and at your own risk.
